This configuration has been tested with ATA Firmware Revisions 1.1.2, 1.2.5, and 1.3.5. See Finding your Zoom ATA's Firmware Revision.
First, you must access the ATA Manager:
- If you are using a Windows computer, download and run the Zoom ATA Manager.
- If you are using a non-Windows computer, or if the Zoom ATA Manager will not run on your computer, you can access the ATA Manager by entering the ATA’s IP address in your web browser’s address field. (Refer to FAQ 986 if you are not sure how to find your ATA’s IP address.)
- When prompted for a Username and Password, enter the following in lowercase letters:
On the Your VoIP Account page, enter the following:
|Service Provider Name||Callcentric|
|Outbound Caller ID||Type your name or a display name you want to use|
|Phone Number (SIP User ID)||Type your Callcentric number, which is 1777 followed by 7 digits (e.g., 17771234567)|
|Auth User Name||Type your Callcentric number, which is 1777 followed by 7 digits (e.g., 17771234567)|
|Auth Password||Type your SIP password, which is the password you created when you signed up for a Callcentric account.|
|Auth Domain||Leave this field blank|
|Subscribe Domain||Leave this field blank|
|Use Outbound Proxy for REFER||Disable|
|Dial Prefix||Leave this field blank|
Leave these settings blank
Now click Save These Settings and then click Reboot ATA.
For a screenshot of an example configuration, click ATA_Callcentric.jpg in the File Attachments area below.